Gold Foil Mast
USD$1,675.00
111cm tapered mast.
Direct control & feedback.
Extremely low drag resistance.
The Gold Foil Mast provides direct control and feedback from the foil underfoot, while providing extremely low drag resistance. The mast tapers from full Tuttle width of 155mm to 110mm near the glider, with the centroid of section fully aligned along its length, resulting in zero secondary torsion or bending induced stresses normally arising from curved masts in compression. The mast is also split into an upper “dry” zone extending 300mm below the underside of the board, where it is thicker, below is the “wet” zone where the mast tapers from 12mm thickness down to its narrowest 11.5mm close to the glider. The extremely stiff upper dry zone provides support to the wet zone giving an overall super-stiff mast with over 90% of the wet zone under 12mm thickness!
Please contact gold-sales@airush.com for sales and shipping of this product.
Key features
Mast Dry Zone / Wet Zone
The mast is split into an upper “dry” zone extending 300mm below the underside of the board, where it is thicker, below is the “wet” zone where the mast tapers from 12mm thickness down to its narrowest 11.5mm close to the glider.
The extremely stiff upper dry zone provides support to the wet zone giving an overall super-stiff mast with over 85% of the wet zone under 12mm thickness! The result is a super-stiff smooth mast with incredible feedback to the rider, but displaying extremely low drag resistance.
Mast Taper
Mast tapers from full Tuttle width of 155mm to 110mm near the glider, with the centroid of section fully aligned along its length, resulting in zero secondary torsion or bending induced stresses normally arising from curved masts in compression. This translates to direct control and feedback of the glider 1.15m below the rider’s feet.
Right image
Right image text
Left image
Left image text
Kitting
1 x 111cm Mast.
1 x Cover.